6. Placed reinforced scanner must meet the following conditions: Peripheral there is no corrosive gas; Asus n73s battery around the laptop battery there is no direct light; clean environment; instrument placed in a flat position;
7. The reinforced scanner exhausted, with a cloth sleeve to hooded to prevent fine dust into the instrument, the instrument internal;
8 After each use, reinforced scanner should unplug the power connector;
9. The reinforced scanner can not disassemble and adjust the adjustable components;
10. Transport or testing process should be shockproof and waterproof.
Two reinforced scanner for use
Preparatory work before a reinforced scanner
First, the instrument is removed from the chassis, when thickness testing and diameter test the connection good probe and hosts, notebook battery reinforced scan when Asus u36j battery you want to host connected to the probe and scan the car, and then press a key on the keyboard, after boot screen .
2 reinforced scanner scanning methods
The following steps are based on actual usage summary operation strictly in accordance with the following steps.
1 to obtain information
Access to the the tested structure design and construction information to determine the approximate location of the tested structure reinforcement, to set the bar diameter and diameter, and the instrument parameters for design value. If the above information does not get the bar diameter is set to system defaults, network scanning profile scan and diameter test function to detect the bar diameter and the thickness of the protective layer.
2 to determine the detection zone
Needed to select a region in the member under test as a detection region, Asus u5f battery to choose a smooth surface area, in order to improve detection accuracy.