3W PAR20 LED bulb,PAR20 LED lamp

3W PAR20 LED bulb,PAR20 LED lamp

Shenzhen : China | Aug 03, 2012 at 8:01 PM PDT
Views: Pending

Model No.: PAR20-E27-3B

Product features:
1.No ultraviolet and infrared ray, and no mercury.
2. Greatly reduce energy consumption and operating cost
3.With the aluminum substrate have good thermal radiation.
4. Long span life
5.Low lumen depreciation
6.Full range of colors
7.Brighter than traditional fluorescent lamps
9.Direct replacement for PAR20 bulbKeywords: PAR20 LED lamp, PAR20 LED bulb, LED bulb, LED light bulb, LED bulb light, dimmable PAR20, PAR20 LED


Working Voltage:AC85-265VAC85-265VOperating Current:320mA570mAPower Factor:>0.6>0.6Power:3W6WLED Qty:3PCS3PCSSize:Ф60×80mmФ60×;80mmCRI≥70≥70Color Temperature:2700-7000K2700-7000KMaterial:Tensile aluminumTensile aluminumBeam Angle:15°/30°/45°/60 °15°/30°/45°/60 °Luminous Flux:195-220LM255-320LMLife:50000H50000HOperatingTemperature:-25 to 45 ℃BaseGU10 /E27/E26 OptionalProtection Degree:IP20Certificates:CE ROHS UL(E348207)Place of Origin:Shenzhen, China



1.Spot lighting
2.Architectural Lighting
3.Display case accent
4.Reading Light
5.Biological lighting

1.Remove the non-functioning bulb from its socket. This can usually be done by removing a retaining clip with your fingers, then removing the UV-coated circular glass pane. After the UV glass pane is removed, you can pull the bulb and wiring harness from the housing. Remove the bulb by pulling it away from the harness with one hand while holding on to the harness with the other.
2. Insert the new bulb by pressing the two exposed pins on the rear of the bulb into the two holes in the harness.
3. Replace the bulb and harness into the housing, then replace the glass pane and retaining clip.

1.Do not see the light sources by eyes directly
2.Please make sure the power is off before use
3.Please do not touch the product surface when it is lighting
4.Indoor use only
5.Please do not put the product as children toy


Remark: All our led spotlights are in such packing, just in different sizes

Trade terms:
1, Payment: T/T, 30% deposits, before the ship to pay the balance end.
2, Delivery time 3, Samples can be delivered in 3days.
4, Freight are quoted under your requests.
5, Shipping Port< Shenzhen, China(Mainland).
6, Discounts are offered depend on quantities
7, MOQ›50pieces.

2012 Danfore Catalog
2012 led spotlight catalog
2012 Led SMD spotlights
2012 Led downlights catalog
2012 Led bulb catalog
2012 LED Tube catalog
2012 Led strip catalog
2012 LED PL Lamp catalog
2012 Led wall washer catalog
2012 LED Panel lights catalog
2012 Led flood lights catalog
2012 Led high bay lights
2012 led track lights catalog
Address : Rm. 1019-1019A,Mingjun Commercial Center, No. 1 Langrong Rd, Dalang, Longhua, Bao'an District, Shenzhen city, Guangdong, China . 518109
Tel: +86 755 222 14820 Fax:+86 755 222 18271 Mobile: +86 135 9032 4017 Danfore Lighting Co., Ltd

danfore is based in Tōkyō, Tokio, Japan, and is a Stringer on Allvoices.
Report Credibility
  • Clear
  • Share:
  • Share
  • Clear
  • Clear
  • Clear
  • Clear

More From Allvoices

Report Your News Got a similar story?
Add it to the network!

Or add related content to this report

Most Commented Reports

Use of this site is governed by our Terms of Use Agreement and Privacy Policy.

© Allvoices, Inc. 2008-2014. All rights reserved. Powered by PulsePoint.