EXOTEK TC6 TC6TEK CHASSIS CONVERSION
Linkedin

EXOTEK TC6 TC6TEK CHASSIS CONVERSION

Nottingham : United Kingdom | Jul 17, 2012 at 3:49 PM PDT
By
XX XX
Views: Pending
 
EXOTEK TC6 TC6TEK CHASSIS CONVERSION Image 2

TC6TEK Performance ultra narrow lipo chassis conversion with bushing supported hinge pin blocks for the TC6.1 or TC6.

- New design incorporates heavy duty bushing supported hinge pin blocks- the same concept incorporated into other world caliber touring cars by Tamiya, Yokomo and Hot Bodies.

- The steel insert bushings insure ultra free suspension movement, no matter the arm angles.

- No locked up and twisted stock plastic blocks- by it’s design the stock TC6 suspension creates more suspension arm lock (friction) onto the hinge pins as more power is put down.

- Newly designed 7075 heavy duty bulkheads included. Shortened design allows for improved chassis flex.

- 4 heavy duty 7075 suspension blocks are included, FF-C, FR-C (split style), RF-XB (split style), RR-D (see the attached chart to view angles). The included blocks will give you 0 degree of front arm sweep and 3 degrees of rear toe.

- Optional hinge blocks are available to quickly adjust the angles to your liking HERE. Also fully compatible with Tamiya sedan blocks.

- Optional hinge spacers are used to adjust for roll center HERE.

- 2.25mm USA made precision cut soft weave carbon fiber.

- Only 84mm wide at the main chassis section to better utilize lower ride heights for more aggressive cornering.

- Shaped cuts for improved flex.

- Includes adjustable carbon fiber lipo craddles.

- Uses the stock steering crank and servo mounting. Double bellcrank alloy steering set with lateral servo mounting is in the prototype stages and will be released later!

Link: Exotek & RC4ME

1 of 8
Next
EXOTEK TC6 TC6TEK CHASSIS CONVERSION Image 1
EXOTEK TC6 TC6TEK CHASSIS CONVERSION
rc4me is based in Nottingham, England, United Kingdom, and is a Reporter for Allvoices.
Report Credibility
 
  • Clear
  • Share:
  • Share
  • Clear
  • Clear
  • Clear
  • Clear
 
 
 
Advertisement
 

Blogs

 >
  • Exotek TC6 TC6TEK CHASSIS CONVERSION | RC4ME

    Submitted By: rc4me | 3 months ago
    Exotek TC6 TC6TEK CHASSIS CONVERSION TC6TEK Performance ultra narrow lipo chassis conversion with bushing supported hinge pin blocks for the TC6.1 or TC6. - New design incorporates heavy duty bushing supported hinge pin blocks- the same concept ...

Images

 >
 

More From Allvoices

Report Your News Got a similar story?
Add it to the network!

Or add related content to this report



Use of this site is governed by our Terms of Use Agreement and Privacy Policy.

© Allvoices, Inc. 2008-2014. All rights reserved. Powered by PulsePoint.