Welcome the future of electronic speed controllers!
The all-new Flux Pro Competition electronic speed controller is the ultimate way to add extra power, control and flexibility to your race car, drifter or crawler. With the Flux Pro Competition controller, you will be able to use a huge range of brushless motors battery types and sizes, and you’ll also be able to program a huge variety of settings to completely customize the driving feel and power delivery you get on the track or course. Up to ten different controller profiles can be stored. Of course, if you just want to ‘set it and forget it’, that’s easily accomplished, with several different preset configurations that you can choose from, such as: modified racing, stock racing, ‘blinky’ spec mode, practice, off-road, drift and crawler!
The aluminium case design and included 5 volt fan help keep heat levels to a minimum, and the small size allows you to fit it in tight spaces. An integrated electronic switch is used that is more reliable than a traditional external mechanical switch. The external connection for the optional programming box will help you store, maintain and change extra settings for different track and weather conditions, should you wish to store several different controller configurations.
Developed with professional HB-HPI drivers and the HPI product R&D team, this is the most advanced speed controller ever offered by HPI Racing, and is the most powerful, versatile and functional speed controller you can find on the market today.
Applications: 1/10 & 1/12 competition, 1/10 drift, 1/10 & 1/8 rock crawler
Compatible Motor: Sensored and sensorless brushless motor
Input: 4-9 cells NiMH/NiCd or 2-3S LiPo
Current: Continuous 120A, Burst 760A
Built-in BEC: 6V@3A (linear mode)
Resistance: 0.0003 Ohm
Suitable Motor With 2 Lipo or 4-6 NiMH: 1/10 on-road: 3.5T & higher, 1/10 off-road: 5.5T & higher
Suitable Motor With 3 Lipo or 7-9 NiMH: 1/10 on-road: 5.5T& higher, 1/10 off-road: 8.5T & higher
Cooling Fan: 5V (Note: use 12V fan with 7-9 cell NiMH or 3S LiPo)
Size: 37.5mm (L) x 31mm (W) x 29.5mm (H), excludes wire connectors, 37mm (W) with wire connectors