Hongxing Brand Screw Washing Machine

The spiral stone washing machine is the use of buoyancy in the water, dust and impurities and gravel separation. After stirring of the helical blade, to achieve the purpose of the treatment to the impurities. Sedimentation tanks, spiral stone washing in the sink lower part of the tilt layout screw head is not into the sedimentation tanks, helical drive screw rotating motor by deceleration to the bottom of the settling tank into which cleaning water thus completing the cleaning, dehydration, and three kinds of classification function.

Spiral stone washing machine has a spirochete, sealing systems, simple structure, processing capability, easy maintenance, washed high spiral stone washing machine is widely used in highway, railway, municipal construction, stones factory, construction site, concrete prefabricated field and hydropower site with a lot of sand and gravel the desliming operations can also be used for sand and gravel washing, grading, dewatering.

Hongxing Brand Screw Washing Machine

Hongxing screw washing machine or sand washer is commonly used in sand factory, electric pole factory, work-site of building and concrete dam to wash, classifying and de-watering various sands. The screw is driven by electric motor through reducer rotating continuously, while the fresh water is feeding from porous plate at bottom of sediment pool. This machine has three functions of washing, de-watering, classifying. De-watering: The sand with bigger density is sunken down to tub bottom; the screw blade push this sand upwards, when passing through upper tub of proper length above water level, the water is draining into sediment pool from another drainage ditch, the de-watered sand is out from the discharging opening. rock crusher:http://www.hx-crusher.com/n110.html

single toggle jaw crusher:http://www.hx-crusher.com/crusher.html

Operation Principle of Spiral Washer

When the machine is working, the material goes into the input part. It will push the material to the output through the machine. Surface dust and impurity are removed when the material from the input part to the output part is pushed, mixed and washed. The final product goes out through the discharge outlet and the mud and impurity will go out through overflow part.

Guide for operation:

Before starting, firstly check the tightness of all the bolts, then raise the handle to make the machine work without load, after making the deposit move, the machine can work normally. The two ends of the bearing should be always maintained with lubricant.

Features of sand washing equipment:

1. This machine’s structure is simple. The impeller drive device is separated with water and the watered materiel avoiding that the bearing is damaged by deeping in water, sand, or

contamination.

2. This machine has obvious advantages compared with screw sand washing equipment/washer.

3. The medium and fine sand are washed away less. The washed construction sand’s gradation and modulus of fineness can get the standard which is regulated in national ‘ construction sand’ and ‘ construction scree and gravel.

4. There is almost no wearing part except screen mesh.

5. The machine usage life is long.

As the professional manufacturer of complete sets of mining machinery, such as bucket sand washer, Henan Hongxing is always doing the best in products and service.